Pillworks Idle

Sterile vs Nonsterile Compounding (USP 795, 797, 800)

By Pillworks · Last reviewed · 6 min read

Educational only, not medical advice. This guide explains general US pharmacy-technician topics. Follow your training, your pharmacist, your state board and the official references for real patients.

Compounding is preparing a medication to fit a patient's needs when a commercial product will not do: a liquid for a patient who cannot swallow tablets, a dye-free version, or an IV bag mixed for one patient. Three USP general chapters set the quality standards most state boards of pharmacy enforce, and individual states may adopt them differently or add stricter rules. This guide covers what a technician needs to know about each one, including the revised chapters that became official in 2023.

What compounding is, and the three USP chapters

Compounding means combining, mixing or altering ingredients to create a preparation tailored to a patient. Federal law describes two routes:

Compounded preparations are not FDA-approved, which is one reason quality standards matter so much.

Three chapters at a glance

ChapterCoversStatus
USP <795>Nonsterile preparations (oral liquids, creams, capsules)Revision official November 1, 2023
USP <797>Sterile preparations (injections, IV bags, eye drops)Revision official November 1, 2023
USP <800>Handling hazardous drugs in any health care settingOfficial since December 1, 2019; compendially applicable November 1, 2023

USP <800> works alongside the other two: a hazardous drug compounded as a sterile preparation must meet both <797> and <800>.

Nonsterile compounding under <795>

A key topic in <795> is the default beyond-use date (BUD), used when there is no USP compounded preparation monograph or preparation-specific stability data. BUDs depend on water activity (aw): a preparation with aw of 0.6 or higher is aqueous; below 0.6 is nonaqueous.

A BUD can be shorter if an ingredient expires sooner.

Worked example. A preserved aqueous oral suspension is compounded on March 3. March has 31 days, so March 3 + 28 days = March 31, and 7 more days reach April 7. The BUD is April 7 (28 + 7 = 35 days).

Sterile compounding under <797>: the categories

The 2023 revision replaced the old low-, medium- and high-risk levels with categories based mainly on where a compounded sterile preparation (CSP) is made and how long it may be kept.

Worked example. A technician starts compounding a Category 1 CSP at 9:00 AM.

If it were an immediate-use CSP started at 10:15 AM, administration would have to begin by 10:15 + 4 hours = 2:15 PM.

BUDs are not cumulative: moving a CSP from room temperature to the refrigerator or freezer does not extend its original BUD, and administration must begin before the BUD passes.

The cleanroom suite: ISO classes, PECs and C-SECs

Air cleanliness is graded by ISO class: the lower the number, the fewer airborne particles. FDA's aseptic processing guidance gives these limits for particles 0.5 µm and larger per cubic meter:

A cleanroom suite for Category 2 work has three layers:

Hazardous drugs under <800> add containment:

Hand hygiene and garbing

The revised <797> lets each facility set the exact order in its written procedures, often based on where the sink is. The guiding principle is to don the dirtiest items first and finish with sterile gloves. A typical sequence:

  1. Shoe covers or dedicated shoes
  2. Head and facial hair covers
  3. Face mask (eye protection when required)
  4. Hand hygiene: wash hands and forearms to the elbows with soap and water, then dry
  5. Gown
  6. Alcohol-based hand rub, allowed to dry
  7. Sterile gloves, put on in the classified area or SCA

Staff are checked with gloved fingertip and thumb sampling as part of garbing competency.

Beyond-use date vs expiration date

A vial's expiration date tells you whether the ingredient is still good; the BUD tells you how long the finished preparation is good.

Key takeaways

Quick check

Q1. A Category 1 CSP was compounded at 2:00 PM and is refrigerated. What is the latest BUD?

Answer: 2:00 PM the next day. Category 1 allows 24 hours or less when refrigerated.

Q2. What is the default BUD for a non-preserved aqueous nonsterile preparation?

Answer: 14 days, refrigerated. Aqueous (aw of 0.6 or more) preparations without a preservative support microbial growth.

Q3. What ISO class must the ante-room for Category 2 compounding meet?

Answer: ISO 8 or better. It is the transition space between unclassified areas and the ISO 7 buffer room.

Practice these in Pillworks Idle.

Sources

  1. USP — General Chapter <797> Pharmaceutical Compounding—Sterile Preparations
  2. USP — General Chapter <795> Pharmaceutical Compounding—Nonsterile Preparations
  3. USP — <797> FAQs (updated December 11, 2023)
  4. USP — <800> FAQs (updated January 21, 2026)
  5. USP-NF — Commentary on the revision of General Chapter <795> (November 2022)
  6. USP-NF — Commentary on the revision of General Chapter <797> (November 2022)
  7. FDA — FD&C Act Provisions that Apply to Human Drug Compounding
  8. FDA — Guidance for Industry, Sterile Drug Products Produced by Aseptic Processing